austria foamed form - in-place foam gasket technology good reputation

Just fill in the form below, click submit, you will get the price list, and we will contact you within one working day. Please also feel free to contact us via email or phone. (* is required).

  • Gasketing (FIPFG)

    With the FIPFG (Formed-In-Place-Foam-Gasket) technology, we meet the high demands of our customers for sealing quality and contour-accurate tightness of the components. Our more than 1000 material formulations offer a wide range of properties.

    Get Price
  • sonderhoff.com

    In addition to the SONDERHOFF products for the Formed-In-Place-(Foam-Gasket) technology, we offer you all the accompanying subcontracting services for your product realisation. It ranges from the production of prototypes and sample parts to taking over the production of small series to continuous series production in our service centers.

    Get Price
  • SONDERHOFF FERMAPOR K31

    SONDERHOFF FERMAPOR K31 is the two-component polyurethane system to produce soft elastic foam gaskets, which are foamed directly onto the part using FIPFG technology (Formed-In-Place-Foam-Gasket). ... The time span in which the SONDERHOFF FERMAPOR K foam system expands to form a seal body (after approx. 30 – 180 seconds).

    Get Price
  • SONDERHOFF FERMASIL

    SONDERHOFF FERMASIL is the two-component silicone system for the manufacturing of soft elastic silicone elastomers and silicone foam sealings for extreme usage conditions. Using FIPFG dispensing technology (Formed-In-Place-Foam-Gasket), SONDERHOFF FERMASIL is applied directly to the part and cures there at room temperature. Overview.

    Get Price
  • Dow Dowsil 3-8219 RF Silicone Foam Gasketing: Foamed

    DOWSIL 3-8219 RF Silicone Foam is a fast reacting material, thus allowing parts to be equipped at a high production rate and avoiding the need for temporary storage to fully develop the cure. As supplied and when properly mixed, DOWSIL 3-8219 RF Silicone Foam has a snap time of typically 3 minutes at 23°C and is cured within about 10 minutes.

    Get Price
  • Dow Silastic 8257 Silicone Foam Gasketing: Foamed-in

    Dow Silastic 8257 Silicone Foam is a 2 Part 2-Part Cure, Room Temperature Cure, Snap Cure, Silicone, Does not contain chlorofluorocarbons (CFCs), Pre-Cure: ... Tech Specs; Best Practices; Comparables; ... room temperature curing silicone foam system developed as a dispensed 'foamed-in-place' gasket material for the automotive and industrial ...

    Get Price
  • Hot Melt Adhesive Dispensing Systems Overview - Norson ...

    2017-1-18u2002·u2002Nordson foam technology combines inert gas with adhesives and sealants to reduce their volume and weight, improving material performance and reducing costs. ... sealing and form-in-place gasket operations require simple-to-use, flexible, and precision fluid dispensing systems ... Industry-best service life and performance combine with ...

    Get Price
  • FERMAPOR - sonderhoff.com

    2018-9-12u2002·u2002FERMAPOR ® K31 – The foaming process • Mixing time: is the time period in which the A and B components are mixed. • ®Reaction time: is the tmi e peroid in whcih the FERMAPOR K31 foam system begins to react (after approx. 15 – 60 seconds*). • ®Rise time: is the time period in which the FERMAPOR K31 foam system expands to form the seal body

    Get Price
  • Keyi Industrial (Shanghai) Co., Ltd.. Supplier from China ...

    PU Gasket Foam Sealing Machine basic on the Foamed (Form)- in-place foam gasket technology or cure in place foam gasket technology. We created a 2-Component mixing head with a water cleaning system. 2-component PU foam system to apply seamless gaskets in manufacturing the doors of electric cabinets and different types of distribution boxes and electrical enclosures.

    Get Price
  • Form and Foam Parts - Trygonal Group

    8 www.trygonal.com www.trygonal.com 9 PUR Foam types Soft Foam Open-cell foam: The walls between the individual cells are open and can therefore absorb liquids Integral Foam Integral foams have a closed thick outer skin and an open-cell core Rigid Foam Open-cell hard foam, liquids can be absorbed Hard-Integral Foam Hard, closed outer skin, liquids are not …

    Get Price
  • Sonderhoff Gasketing Total Process Solution for Low ...

    Henkel proposed a total process solution, leveraging the flexibility and precision of its Sonderhoff automated dosing machine in combination with FERMAPOR K31 two-component polyurethane system to produce soft elastic foam gaskets, which are foamed directly onto the part using FIPFG (Formed-In-Place-Foam-Gasket) technology.

    Get Price
  • Foam-in-place

    The foam-in-place (FIP) process is a reaction of polyurethane chemicals that creates foam, which is used to fill voids in cut-and-sewn laminate parts as well as between two parts of a mold. Our Dureflex® and Platilon® thermoplastic polyurethane films can be used as a barrier to prevent reacting polyurethane foam from penetrating the laminate ...

    Get Price
  • Dow Dowsil 3-8219 RF Silicone Foam Gasketing: Foamed

    DOWSIL 3-8219 RF Silicone Foam is a fast reacting material, thus allowing parts to be equipped at a high production rate and avoiding the need for temporary storage to fully develop the cure. As supplied and when properly mixed, DOWSIL 3-8219 RF Silicone Foam has a snap time of typically 3 minutes at 23°C and is cured within about 10 minutes.

    Get Price
  • Foam-In-Place Gasket Service

    Foam-In-Place Gasketing Service As a full-service custom molder, Falcon Plastics is one of few molders that offer customers formed in place foam gasket technology (FIPG and FIPFG). This is a foam-in-place technology that forms superior, cut resistant gaskets for electrical enclosures, industrial lighting, and other applications in grooved parts.

    Get Price
  • Power-Packed fipfg machine For Heavy Industry Uses ...

    Foamed in Place Polyurethane two-component Gasket Sealing FIPFG Machine. US $ ... Form in place foam gasket machine for lighting shell. US $48000-$49500 Set. 1 Set (Min. Order) 6 YRS Dalian Jinjie Innovation Technology Co., Ltd. 100.0%. Contact Supplier. Good sale FIPFG gasket sealing equipment. US $40000-$60000 Set. 1 Set (Min. Order) 10 ...

    Get Price
  • Sealing, Gluing, Potting - Multiple Solutions for the ...

    2019-6-14u2002·u2002In recent decades, foamed seals made of polyurethane, but also silicone, have become the standard. These gaskets are applied directly to the component to be sealed using FIPFG (Formed-In-Place-Foam-Gasket) technology with the aid of modern mixing and dosing systems. The PU foam then cures at room temperature to form an elastic soft foam seal.

    Get Price
  • HGTJ401, gasket sealing machine for sheet matel ...

    Foam machine is foamed directly onto the part by using FIPFG (formed-in-place foam gasket) technology, This technology replaces the traditional method of tape affixed, and the surface crust uniform and excellent flexibility. Widely used in enclosure, lighting, and automobile industries. At present produced by Lianshi brand of automatic foam ...

    Get Price
  • FERMAPOR K31, two-component, room-temperature

    FERMAPOR K31 is the trade name for Sonderhoff's two-component polyurethane systems for the manufacture of flexible foam seals which are foamed directly onto the part by using FIPFG (formed-in-place foam gasket) technology. The systems consist of a resin (A-component) and a hardener (B-component) which are mixed together at a prescribed ratio ...

    Get Price
  • Hot Melt Adhesive Dispensing Systems Overview - Norson ...

    2017-1-18u2002·u2002Econo-Pak's Compact Case Packer Uses the Latest Adhesive Technology. Adhesive Dispensing Systems. One of many OEMs to opt for the innovative ProBlue Liberty hot melt application system from Nordson recently is Econo-Pak GmbH. With headquarters at Flonheim in the German state of….

    Get Price
  • Polymeric foam gaskets and seals - Chemque, Inc.

    Foam gaskets having excellent water impermeability are also possible. Foams having very low density may be produced, improving compression recovery and decreasing the hardness and compression deflection substantially. Moreover, a low-density foam gasket has less weight per volume than a non-foamed gasket resulting in lower cost to produce.

    Get Price
  • Sonderhoff Gasketing Total Process Solution for Low ...

    Henkel proposed a total process solution, leveraging the flexibility and precision of its Sonderhoff automated dosing machine in combination with FERMAPOR K31 two-component polyurethane system to produce soft elastic foam gaskets, which are foamed directly onto the part using FIPFG (Formed-In-Place-Foam-Gasket) technology.

    Get Price
  • Foam-in-place

    The foam-in-place (FIP) process is a reaction of polyurethane chemicals that creates foam, which is used to fill voids in cut-and-sewn laminate parts as well as between two parts of a mold. Our Dureflex® and Platilon® thermoplastic polyurethane films can be used as a barrier to prevent reacting polyurethane foam from penetrating the laminate ...

    Get Price
  • Dow Dowsil 3-8219 RF Silicone Foam Gasketing: Foamed

    DOWSIL 3-8219 RF Silicone Foam is a fast reacting material, thus allowing parts to be equipped at a high production rate and avoiding the need for temporary storage to fully develop the cure. As supplied and when properly mixed, DOWSIL 3-8219 RF Silicone Foam has a snap time of typically 3 minutes at 23°C and is cured within about 10 minutes.

    Get Price
  • Foam-In-Place Gasket Service

    Foam-In-Place Gasketing Service As a full-service custom molder, Falcon Plastics is one of few molders that offer customers formed in place foam gasket technology (FIPG and FIPFG). This is a foam-in-place technology that forms superior, cut resistant gaskets for electrical enclosures, industrial lighting, and other applications in grooved parts.

    Get Price
  • Power-Packed fipfg machine For Heavy Industry Uses ...

    Foamed in Place Polyurethane two-component Gasket Sealing FIPFG Machine. US $ ... Form in place foam gasket machine for lighting shell. US $48000-$49500 Set. 1 Set (Min. Order) 6 YRS Dalian Jinjie Innovation Technology Co., Ltd. 100.0%. Contact Supplier. Good sale FIPFG gasket sealing equipment. US $40000-$60000 Set. 1 Set (Min. Order) 10 ...

    Get Price
  • Sealing, Gluing, Potting - Multiple Solutions for the ...

    2019-6-14u2002·u2002In recent decades, foamed seals made of polyurethane, but also silicone, have become the standard. These gaskets are applied directly to the component to be sealed using FIPFG (Formed-In-Place-Foam-Gasket) technology with the aid of modern mixing and dosing systems. The PU foam then cures at room temperature to form an elastic soft foam seal.

    Get Price
  • HGTJ401, gasket sealing machine for sheet matel ...

    Foam machine is foamed directly onto the part by using FIPFG (formed-in-place foam gasket) technology, This technology replaces the traditional method of tape affixed, and the surface crust uniform and excellent flexibility. Widely used in enclosure, lighting, and automobile industries. At present produced by Lianshi brand of automatic foam ...

    Get Price
  • FERMAPOR K31, two-component, room-temperature

    FERMAPOR K31 is the trade name for Sonderhoff's two-component polyurethane systems for the manufacture of flexible foam seals which are foamed directly onto the part by using FIPFG (formed-in-place foam gasket) technology. The systems consist of a resin (A-component) and a hardener (B-component) which are mixed together at a prescribed ratio ...

    Get Price
  • Hot Melt Adhesive Dispensing Systems Overview - Norson ...

    2017-1-18u2002·u2002Econo-Pak's Compact Case Packer Uses the Latest Adhesive Technology. Adhesive Dispensing Systems. One of many OEMs to opt for the innovative ProBlue Liberty hot melt application system from Nordson recently is Econo-Pak GmbH. With headquarters at Flonheim in the German state of….

    Get Price
  • Polymeric foam gaskets and seals - Chemque, Inc.

    Foam gaskets having excellent water impermeability are also possible. Foams having very low density may be produced, improving compression recovery and decreasing the hardness and compression deflection substantially. Moreover, a low-density foam gasket has less weight per volume than a non-foamed gasket resulting in lower cost to produce.

    Get Price
  • Sonderhoff Gasketing Total Process Solution for Low ...

    Henkel proposed a total process solution, leveraging the flexibility and precision of its Sonderhoff automated dosing machine in combination with FERMAPOR K31 two-component polyurethane system to produce soft elastic foam gaskets, which are foamed directly onto the part using FIPFG (Formed-In-Place-Foam-Gasket) technology.

    Get Price
  • Foam-in-place

    The foam-in-place (FIP) process is a reaction of polyurethane chemicals that creates foam, which is used to fill voids in cut-and-sewn laminate parts as well as between two parts of a mold. Our Dureflex® and Platilon® thermoplastic polyurethane films can be used as a barrier to prevent reacting polyurethane foam from penetrating the laminate ...

    Get Price
  • Dow Dowsil 3-8219 RF Silicone Foam Gasketing: Foamed

    DOWSIL 3-8219 RF Silicone Foam is a fast reacting material, thus allowing parts to be equipped at a high production rate and avoiding the need for temporary storage to fully develop the cure. As supplied and when properly mixed, DOWSIL 3-8219 RF Silicone Foam has a snap time of typically 3 minutes at 23°C and is cured within about 10 minutes.

    Get Price
  • Foam-In-Place Gasket Service

    Foam-In-Place Gasketing Service As a full-service custom molder, Falcon Plastics is one of few molders that offer customers formed in place foam gasket technology (FIPG and FIPFG). This is a foam-in-place technology that forms superior, cut resistant gaskets for electrical enclosures, industrial lighting, and other applications in grooved parts.

    Get Price
  • Power-Packed fipfg machine For Heavy Industry Uses ...

    Foamed in Place Polyurethane two-component Gasket Sealing FIPFG Machine. US $ ... Form in place foam gasket machine for lighting shell. US $48000-$49500 Set. 1 Set (Min. Order) 6 YRS Dalian Jinjie Innovation Technology Co., Ltd. 100.0%. Contact Supplier. Good sale FIPFG gasket sealing equipment. US $40000-$60000 Set. 1 Set (Min. Order) 10 ...

    Get Price
  • Sealing, Gluing, Potting - Multiple Solutions for the ...

    2019-6-14u2002·u2002In recent decades, foamed seals made of polyurethane, but also silicone, have become the standard. These gaskets are applied directly to the component to be sealed using FIPFG (Formed-In-Place-Foam-Gasket) technology with the aid of modern mixing and dosing systems. The PU foam then cures at room temperature to form an elastic soft foam seal.

    Get Price
  • HGTJ401, gasket sealing machine for sheet matel ...

    Foam machine is foamed directly onto the part by using FIPFG (formed-in-place foam gasket) technology, This technology replaces the traditional method of tape affixed, and the surface crust uniform and excellent flexibility. Widely used in enclosure, lighting, and automobile industries. At present produced by Lianshi brand of automatic foam ...

    Get Price
  • FERMAPOR K31, two-component, room-temperature

    FERMAPOR K31 is the trade name for Sonderhoff's two-component polyurethane systems for the manufacture of flexible foam seals which are foamed directly onto the part by using FIPFG (formed-in-place foam gasket) technology. The systems consist of a resin (A-component) and a hardener (B-component) which are mixed together at a prescribed ratio ...

    Get Price
  • Hot Melt Adhesive Dispensing Systems Overview - Norson ...

    2017-1-18u2002·u2002Econo-Pak's Compact Case Packer Uses the Latest Adhesive Technology. Adhesive Dispensing Systems. One of many OEMs to opt for the innovative ProBlue Liberty hot melt application system from Nordson recently is Econo-Pak GmbH. With …

    Get Price
  • Polymeric foam gaskets and seals - Chemque, Inc.

    Foam gaskets having excellent water impermeability are also possible. Foams having very low density may be produced, improving compression recovery and decreasing the hardness and compression deflection substantially. Moreover, a low-density foam gasket has less weight per volume than a non-foamed gasket resulting in lower cost to produce.

    Get Price
  • Sonderhoff Gasketing Total Process Solution for Low ...

    Henkel proposed a total process solution, leveraging the flexibility and precision of its Sonderhoff automated dosing machine in combination with FERMAPOR K31 two-component polyurethane system to produce soft elastic foam gaskets, which are foamed directly onto the part using FIPFG (Formed-In-Place-Foam-Gasket) technology.

    Get Price
  • Foam-in-place

    The foam-in-place (FIP) process is a reaction of polyurethane chemicals that creates foam, which is used to fill voids in cut-and-sewn laminate parts as well as between two parts of a mold. Our Dureflex® and Platilon® thermoplastic polyurethane films can be used as a barrier to prevent reacting polyurethane foam from penetrating the laminate ...

    Get Price
  • Dow Dowsil 3-8219 RF Silicone Foam Gasketing: Foamed-in ...

    DOWSIL 3-8219 RF Silicone Foam is a fast reacting material, thus allowing parts to be equipped at a high production rate and avoiding the need for temporary storage to fully develop the cure. As supplied and when properly mixed, DOWSIL 3-8219 RF Silicone Foam has a snap time of typically 3 minutes at 23°C and is cured within about 10 minutes.

    Get Price
  • Foam-In-Place Gasket Service

    Foam-In-Place Gasketing Service As a full-service custom molder, Falcon Plastics is one of few molders that offer customers formed in place foam gasket technology (FIPG and FIPFG). This is a foam-in-place technology that forms superior, cut resistant gaskets for electrical enclosures, industrial lighting, and other applications in grooved parts.

    Get Price
  • Power-Packed fipfg machine For Heavy Industry Uses ...

    Foamed in Place Polyurethane two-component Gasket Sealing FIPFG Machine. US $ ... Form in place foam gasket machine for lighting shell. US $48000-$49500 Set. 1 Set (Min. Order) 6 YRS Dalian Jinjie Innovation Technology Co., Ltd. 100.0%. Contact Supplier. Good sale FIPFG gasket sealing equipment. US $40000-$60000 Set. 1 Set (Min. Order) 10 ...

    Get Price
  • Sealing, Gluing, Potting - Multiple Solutions for the ...

    2019-6-14u2002·u2002In recent decades, foamed seals made of polyurethane, but also silicone, have become the standard. These gaskets are applied directly to the component to be sealed using FIPFG (Formed-In-Place-Foam-Gasket) technology with the aid of modern mixing and dosing systems. The PU foam then cures at room temperature to form an elastic soft foam seal.

    Get Price
  • HGTJ401, gasket sealing machine for sheet matel ...

    Foam machine is foamed directly onto the part by using FIPFG (formed-in-place foam gasket) technology, This technology replaces the traditional method of tape affixed, and the surface crust uniform and excellent flexibility. Widely used in enclosure, lighting, and automobile industries. At present produced by Lianshi brand of automatic foam ...

    Get Price
  • FERMAPOR K31, two-component, room-temperature

    FERMAPOR K31 is the trade name for Sonderhoff's two-component polyurethane systems for the manufacture of flexible foam seals which are foamed directly onto the part by using FIPFG (formed-in-place foam gasket) technology. The systems consist of a resin (A-component) and a hardener (B-component) which are mixed together at a prescribed ratio ...

    Get Price
  • Hot Melt Adhesive Dispensing Systems Overview - Norson ...

    2017-1-18u2002·u2002Econo-Pak's Compact Case Packer Uses the Latest Adhesive Technology. Adhesive Dispensing Systems. One of many OEMs to opt for the innovative ProBlue Liberty hot melt application system from Nordson recently is Econo-Pak GmbH. With headquarters at Flonheim in the German state of….

    Get Price
  • Polymeric foam gaskets and seals - Chemque, Inc.

    Foam gaskets having excellent water impermeability are also possible. Foams having very low density may be produced, improving compression recovery and decreasing the hardness and compression deflection substantially. Moreover, a low-density foam gasket has less weight per volume than a non-foamed gasket resulting in lower cost to produce.

    Get Price
  • Sonderhoff Gasketing Total Process Solution for Low ...

    Henkel proposed a total process solution, leveraging the flexibility and precision of its Sonderhoff automated dosing machine in combination with FERMAPOR K31 two-component polyurethane system to produce soft elastic foam gaskets, which are foamed directly onto the part using FIPFG (Formed-In-Place-Foam-Gasket) technology.

    Get Price
  • Foam-in-place

    The foam-in-place (FIP) process is a reaction of polyurethane chemicals that creates foam, which is used to fill voids in cut-and-sewn laminate parts as well as between two parts of a mold. Our Dureflex® and Platilon® thermoplastic polyurethane films can be used as a barrier to prevent reacting polyurethane foam from penetrating the laminate ...

    Get Price
  • Dow Dowsil 3-8219 RF Silicone Foam Gasketing: Foamed

    DOWSIL 3-8219 RF Silicone Foam is a fast reacting material, thus allowing parts to be equipped at a high production rate and avoiding the need for temporary storage to fully develop the cure. As supplied and when properly mixed, DOWSIL 3-8219 RF Silicone Foam has a snap time of typically 3 minutes at 23°C and is cured within about 10 minutes.

    Get Price
  • Foam-In-Place Gasket Service

    Foam-In-Place Gasketing Service As a full-service custom molder, Falcon Plastics is one of few molders that offer customers formed in place foam gasket technology (FIPG and FIPFG). This is a foam-in-place technology that forms superior, cut resistant gaskets for electrical enclosures, industrial lighting, and other applications in grooved parts.

    Get Price
  • Power-Packed fipfg machine For Heavy Industry Uses ...

    Foamed in Place Polyurethane two-component Gasket Sealing FIPFG Machine. US $ ... Form in place foam gasket machine for lighting shell. US $48000-$49500 Set. 1 Set (Min. Order) 6 YRS Dalian Jinjie Innovation Technology Co., Ltd. 100.0%. Contact Supplier. Good sale FIPFG gasket sealing equipment. US $40000-$60000 Set. 1 Set (Min. Order) 10 ...

    Get Price
  • Sealing, Gluing, Potting - Multiple Solutions for the ...

    2019-6-14u2002·u2002In recent decades, foamed seals made of polyurethane, but also silicone, have become the standard. These gaskets are applied directly to the component to be sealed using FIPFG (Formed-In-Place-Foam-Gasket) technology with the aid of modern mixing and dosing systems. The PU foam then cures at room temperature to form an elastic soft foam seal.

    Get Price
  • HGTJ401, gasket sealing machine for sheet matel ...

    Foam machine is foamed directly onto the part by using FIPFG (formed-in-place foam gasket) technology, This technology replaces the traditional method of tape affixed, and the surface crust uniform and excellent flexibility. Widely used in enclosure, lighting, and automobile industries. At present produced by Lianshi brand of automatic foam ...

    Get Price
  • FERMAPOR K31, two-component, room-temperature

    FERMAPOR K31 is the trade name for Sonderhoff's two-component polyurethane systems for the manufacture of flexible foam seals which are foamed directly onto the part by using FIPFG (formed-in-place foam gasket) technology. The systems consist of a resin (A-component) and a hardener (B-component) which are mixed together at a prescribed ratio ...

    Get Price
  • Hot Melt Adhesive Dispensing Systems Overview - Norson ...

    2017-1-18u2002·u2002Econo-Pak's Compact Case Packer Uses the Latest Adhesive Technology. Adhesive Dispensing Systems. One of many OEMs to opt for the innovative ProBlue Liberty hot melt application system from Nordson recently is Econo-Pak GmbH. With …

    Get Price
  • Polymeric foam gaskets and seals - Chemque, Inc.

    Foam gaskets having excellent water impermeability are also possible. Foams having very low density may be produced, improving compression recovery and decreasing the hardness and compression deflection substantially. Moreover, a low-density foam gasket has less weight per volume than a non-foamed gasket resulting in lower cost to produce.

    Get Price

24 hours at your service:

Newsletter